• LIQUID is a 100% ecological agent against all types of fires, composed of only 3 plants
• It is mixed from 0,2% to 3% with fresh water, seawater, or antifreeze
• It treats all types of fires A, B, C, D, and F

Alve-One®, an innovative and sustainable chemical blowing agent for thermoplastics developed by Solvay in collaboration with the industry aiming at replacing azodicarbonamide (ADCA) and other hazardous blowing agents.

• REACH compliant (not a SVHC), safe for humans and environment throughout its entire life cycle;
• Promotes plastic foams recyclability;
• No odors nor VOCs generated;
• Weight reduction and insulation;
• Faster foam production cycles and formulations optimization;
• Safer working conditions and simpler logistics.

The has launched a consultation on alternative substances or technologies on 8 applications for authorisation covering 10 uses of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated, used in the production of various medical devices (e.g. in vitro diagnostic kits / reagents) and medicinal / biopharmaceuticals (e.g. Active Pharmaceutical Ingredients).

by 8 April 2020 (23:59 Helsinki time).

FineCell's Cellulose Hydrogel is a thick and shear-thinning suspension of cellulose microfibers in water, produced from FineCell’s Cellulose Powder.

This material is a sustainable and multifunctional ingredient to help cosmetic manufacturers make their products more sustainable, enhance their products’ shelf life and functionality, as well as make their products’ ingredient lists shorter and more understandable for the consumers.

FineCell’s Cellulose Hydrogel is a thick and shear-thinning suspension of cellulose microfibers in water, produced from FineCell’s Cellulose Powder. It has a viscosity specifically suitable for extrusion by using a 3D bioprinter.

This material is a multifunctional ingredients to help manufacturers of 3D bioprinting hydrogels (aslo called "bioinks") to make affordable bioinks with excellent printability, shape fidelity, and shape stability.

EcoClearProx® is a patented biodegradable organic hydrogen peroxide (H2O2) solution,

EcoClearProx® is registered for a broad spectrum of applications.

The key words of our mission are sustainability, efficacy, and respect for humans, animals and environment.

OXSOFT GPO is a phthalate-free plasticizer that can replace traditional phthalate products and is being applied in a broad variety of end-uses, such as automotive, construction, wire and cable insulation, flooring, household and medical applications. OXSOFT GPO is suitable as a general purpose plasticizer. The properties are very similar as DOP and OXSOFT GPO can be used as a direct replacement for DOP but also for other general purpose phthalates like DINP.

OXSOFT TOTM LE is a phthalate-free plasticizer that can replace traditional phthalate products and is being applied in a broad variety of end-uses. OXSOFT TOTM is a permanent, non-migrating plasticizer with excellent elevated temperature properties. In every application where migration is a concern OXSOFT TOTM can limit these concerns due to its permanent character. Suggested and existing applications are medical, cable and wire. In automotive and in-house applications OXSOFT TOTM is highly recommended due to outstanding fogging and non-VOC properties.

Tributyl Citrate (TBC) is an excellent replacement for phthalates and adipates as it has a matching plasticiser performance. It is commonly used in cosmetics, food contact films, and articles of plastic and it is a fast-fusing plasticiser for technical applications. It has excellent compatibility with PVC, making it a well-suited and recommended plasticiser for artificial leathers, textile coatings, floorings, and many other common commercial and industrial applications.

Plasticisers are used to soften plastic and the most well-known plasticisers are phthalates. There are concerns regarding the toxicity of some phthalates and therefore, choosing a non-phthalate plasticiser might be a safer alternative. Acetyl Triethyl Citrate (ATBC) is a non-phthalate plasticiser for sensitive applications. ATBC does not pose any toxicological, ecotoxicological or environmental concerns. It is a well-suited and recommended plasticiser not only for medical devices, toys, food packaging, and personal care, but also for technical applications such as artificial leathers, textile coatings, floorings, and automotive engineering.

Bio-based 5-HMF has the potential as economically and ecologically interesting formaldehyde substitute in UF, MF and PF resins

Ethyl-L-lactate is the ethyl ester deriving from L-lactic acid which is produced through the bio-fermentation of corn and is featured in high optical purity, colorless clear liquid, light characteristic odor, it’s miscible with most organic solvents, and can completely dissolve in water.

AQUAWORKER is specifically developed for water disinfection in tough environments. AquaWorker stops harmful microorganisms from entering water systems (e.g. cooling systems) and reduces the risk for biological growth in circulation systems.

Extremely durable materials meet the tough demands of the corrosive industrial environment (chemicals, salinity, ambient humidity and shifting water temperatures) to ensure long-term, trouble-free operation. AquaWorker can be installed in fresh or seawater applications.

Point-Of-Sales receipts for retailers with high requirements for sustainabilility standards

• Long-life retail receipts
• Printouts for medicinal analyses, drug testing, etc.
• Persistent receipts for taxis, gas stations or applications that need archiving
• Thermal print-outs in direct contact with food